Stjarnagloss Glo Hydrophobic Snow Foam 1L

Stjarnagloss Glo Hydrophobic Snow Foam

What do you get if you mix Glatt and Snö? Glö. Combining the fun part (snow foaming) and the part we all crave (beads) into one process. To be used after pre-wash and contact wash stage. Layer on the foam like you would at the beginning, but rather than watching the dirt dribble away you'll watch (and hear) the foam crackle and disperse leaving your paintwork and glass looking unbelievably glossy and full of tall and proud beads. Rinse again and towel dry. The car will be glowing.  

Apply it via a professional snow foam cannon with a pressure washer capable of 130bar or more for best results. You probably won't use all the mixture on a single car. At Stjärnagloss we reckon a litre of concentrate is good for 20-40 protective layers.

IMPORTANT - you must rinse out your snow foam cannon after using Glö, all hydrophobic/sealant snow foams can potentially gum up the snow foam cannon gauze/internals and prevent it working properly in the future. After applying Glö, simply run a litre of pure water through the snow foam lance to flush it through. Do this every time. We cannot accept liability for snow foam cannons that fail to perform properly after this product has been applied. If your snow foam cannon fails, new gauzes and lance cleaning/disassembly tips can be found online.

How To Use:

1. Apply Glö via a snow foam cannon using a pressure washer with at least 130bar for best results. If using a lower-powered washer, a stronger mix may be necessary. We recommend 100ml in a litre lance flask initially as a starting dilution but the product can be used at higher or lower concentrations.
2. Allow the foam to dwell for a short time, then rinse thoroughly with water.