CARPRO ALLiN Polish Compound 250ml

1. Prepare the Surface – Thoroughly wash and dry the vehicle before use. Remove any bonded contaminants to ensure the paintwork is clean and ready for polishing.
2. Prepare the Polishing Pad – Apply a few small drops of CARPRO ALLiN to a suitable polishing pad. Spread the compound evenly across the pad.
3. Work the Product – Using a dual-action or rotary machine polisher, work a small section at a time with controlled, overlapping passes. Adjust machine speed and pressure according to the paintwork and level of correction required.
4. Remove Residue – Once polishing is complete, wipe away any remaining residue using a clean, soft microfibre cloth.
5. Inspect the Finish – Check the results under suitable lighting and repeat if further correction is required. Wipe down the paintwork before applying your chosen protection.

Important: CARPRO ALLiN is designed for use with a dual-action (DA) polisher only, not a rotary machine. Allow the residue to sit for at least 30 minutes before buffing to maximise the protective finish. Full hydrophobic protection develops over approximately 24 hours.