FREE SHIPPING ON ALL ORDERS OVER £75!
Bleeding Reactive Iron Fallout Remover, the hottest and most visually pleasing product to grace the detailing community in recent years. Ferrous contamination causes a major problem in the world of detailing, tiny particles of iron fallout (commonly seen from industrial/rail fallout and brake dust) are deposited on your vehicle and become embedded into the delicate surface. These small iron particles become bonded to the surface, slowly corroding and can prove difficult to remove with normal cleaning, this has a visual effect if left to build up and can cause damage to the surface itself in extreme cases.
Directions for use:
- Use suitable wash method to remove loose soiling.
- Shake well before use and spray Blood Tonic evenly onto the surface to be treated at the correct dilution rate ( most effective on a dry surface).
- Allow to dwell for a few moments and watch the formula get to work as it changes colour in areas that are effected by ferrous contamination.
- Rinse thoroughly with high pressure wash.
Do not allow the product to dry on the surface
Caution must be taken when used in direct sun light as the product will dry out quicker and could cause non permanent staining.