FREE SHIPPING ON ALL ORDERS OVER £50!
Auto Finesse Soul Carnuba Wax 150g. Every single car wax we make at Auto Finesse is unique, and each has its own special visual attributes and performance characteristics that we like to think of as its ‘Soul’. Auto Finesse Soul truly lives up to its name, with a glassy reflectivity and gloss that makes light, bright colours look like they are absolutely alive. Soul marks your entrance into the realm of our professional car waxes, each formulated to create a special effect. Let your vehicle’s natural beauty shine through, with just a little bit of Soul…
All Auto Finesse waxes are carefully blended by hand in Great Britain from the finest quality natural ingredients available, and bring with them the same philosophy of performance and beauty as the rest of our detailing products. The waxes we use treat your car with nature’s own defense against the elements, giving it water repellency, and resistance to environmental pollution (Including UV-fading, acid rain, and bird droppings.). Let’s take a look at what else makes Auto Finesse Soul special…
Auto Finesse Soul contains 33% T1 Grade Brazilian carnauba wax by volume, with the remainder being made up by all natural Beeswax, Candelilla wax, and oils.
Highly reflective visual dynamics with a crisp, glass-like finish makes Soul especially well suited to light, bright colours. Even the palest hues burst into life with a natural glossy glow.
Soul is capable of providing up to 3-months of durable protection on a daily driver, but with a simply delicious sweet mango scent, few can wait that long before they want to apply it again!
Good beading and sheeting performance is a feature of our car waxes that we at Auto-Finesse are especially proud of, and Soul is no exception. You’ll just have to see it for yourself…
Soul is the first of our professional-grade ‘hard’ waxes. Its firm consistency allows the wax to be spread in super-thin coats, minimizing waste, and making buff-off a breeze.
Whether your car or motorcycle has a modern clearcoat, or a classic single-stage paint system, Auto-Finesse car waxes will give it the protection it needs to survive the realities of everyday life. For the detailing professional or dedicated weekend enthusiast, there simply is no finer way to complete your flawless Auto Finesse style finish.
Before waxing, make sure that the vehicle is clean, and cool to the touch. If bonded contamination is present, use a clay bar to prep the surface for best results. If the paintwork is lightly marred, or the car has not been polished in the last 6-12 months, it is also advisable to use one of our signature pre-wax cleansers in order to create the maximum shine. Place an Auto-Finesse Wax Mate foam applicator inside the pot of wax, and rotate it half a turn to prime the pad with product. This is typically enough car wax to protect a single moderately-sized panel, though this may vary depending upon the condition of the paintwork. Apply the car wax to the panel with small, overlapping circular strokes, light pressure, and in a consistent pattern to obtain full coverage of the paint. If the applicator feels like it is starting to run dry across the surface, or coverage becomes uneven, return the applicator to the container using another quarter-turn of the pad to re-prime the foam. The goal when waxing is to apply the product as thinly and evenly as possible, since a little bit goes a very long way to protecting and enhancing the shine of your vehicle.
Once you have completed one normal-sized panel, or half of a large one, move on to another section of equal size. When you are done waxing the second section, you will be ready to buff off the car wax from the first using a plush Microfiber Towel. Alternating in between buffing and waxing panels until the vehicle is fully protected allows you to maintain the ideal curing times for the car wax, and makes for very easy removal of the remaining residue. Auto-Finesse Soul only takes a few minutes to cure, so take care not to let the product dry onto the surface. If the car wax has been allowed to dry, or ‘secondary hazing’ of the car wax occurs (A phenomenon which can sometimes happen in hot or humid climates, especially if the product was over-applied.), you can use a water-based QD like Auto-Finesse Finale to help ease removal of the residue. When applying multiple layers of car wax for extra depth, wetness, and protection, make sure to wait at least 3-hours in between coats to allow the organic solvents to fully flash.
For best results, do not wax the vehicle if the ambient temperature is below (Approximately 6-degrees Celsius), or above 95-degrees Fahrenheit (35-Degrees Celsius). Waxing in direct sunlight, or conditions of high humidity can respectively lead to over, or under-curing of the product before removal.