FREE SHIPPING ON ALL ORDERS OVER £50!
Auto Finesse Revitalise No.2 Polishing Compound 500ml. Revitalise No:2 the mid range cutting polish in the Revitalise range. Revitalise No:2 polishing compound has been developed for use via dual action/random orbital polishers, capable of tackling medium to light paint defects on a range of paint types and finishes. Revitalise polishing compound contains diminishing abrasive technology to reduce inflicted defects and to create a crisper finish and wider cut range. This will leave you with a swirl free finish ready to refine with Revitalise No.3 refining compound.
As with all of the Auto Finesse Revitalise compounds, No.2 was designed to work in-conjunction with the Revitalise pad range. The combination of pad and compound allows you to effortlessly remove light defects and correct your paintwork with ease. Once polishing with Revitalise No.2 is complete we recommend that you follow up No.3. This will ensure no holograms remain and you will be left with defect free paint.
The Auto Finesse Revitalise range was designed for detailing hobbyists looking to perfect their own paintwork. All of the Revitalise polishes and pad have been designed for use with a dual action/random orbital polisher. All of the compounds and pads have been numbered and colour coded to make sure your first machine polishing experience runs as smooth as possible. The combination of the Revitalise compounds, pads and a dual action polisher will allow you to safely enter the world of machine polishing and get you correcting paint in no time.
The Auto Finesse Revitalise compound No.2 is designed to work in-conjunction with the yellow polishing pad. Once the pad has been primed using Pad Prime, apply two pea sized dots of compound to the pad. On speed setting one work the compound in to a two-foot by two-foot area. Once completed turn your speed up to four, five or six dependent on what is comfortable to work with. Apply moderate pressure and work in overlapping passes, ensuring the machine is always spinning. Work the compound for around two minutes until the compound is clear. Once this is done, turn your machine off, and use a clean microfiber cloth to remove residue and inspect your work.