Nanolex WashCoat (200ml & 750ml)

Nanolex WashCoat is an incredibly quick and effective way to protect and maintain exterior automotive surfaces.

WashCoat is applied to the car after washing, whilst the car is still wet. It forms a chemical bond with the paint and refreshes previously-applied protective layers. Both the gloss level of the paint and the water beading properties are highly increased after a treatment with WashCoat. Your car will also stay cleaner for longer, and will be easier to wash.

WashCoat can be applied using a foam lance or a pump sprayer.

With proper maintenance Nanolex WashCoat has a longevity of approximately 2,000 km on the surfaces it was applied to.

Nanolex WashCoat was developed, tested and manufactured in Germany.

How To Use Nanolex WashCoat

This product can be stored for up to 24 months (in a dry, temperature stable environment) Processing temperature: 3-30°C - Avoid direct sunlight.

1. Cleaning Nanolex WashCoat can be applied to all exterior surfaces. The surface must be wet and free of contamination.

2. Application of Nanolex WashCoat Apply WashCoat only to wet surfaces, preferably after washing the car, before rinsing. Nanolex WashCoat should be applied by using a foam lance or a pump sprayer. Only dilute Nanolex Washcoat immediately before using it. Use 50-100ml for an initial application and 20-50ml for maintenance solved in 500ml of water. Spread all of the solution evenly on the surface and let it sit until the foam has built droplets and settled on the surface. Rinse after a maximum of 3 minutes using a pressure washer. Make sure that all residue is removed properly. Dry the car carefully, using a soft, plush towel.

3. Curing period Nanolex WashCoat is fully cured by the time you rinse it.

4. Cleaning treated surfaces Please read the separate information on how to clean your car after a treatment with Nanolex sealants.